Optimisation of the spark plasma sintering process for high volume fraction SiCp/Al composites by orthogonal experimental design

Based on orthogonal experimental design (OED), the effects of the sintering pressure, sintering temperature and holding time on the mechanical properties of 50 vol% silicon carbide particle (SiCp)/2024Al composites prepared by spark plasma sintering (SPS) were investigated. The sintering pressure had the greatest effect on the density and bending strength of the material among these three factors, followed by sintering temperature and holding time. The optimised process conditions for producing the 50 vol% SiCp/2024Al were sintering at 550 °C for 5 min under 40 MPa, which resulted in a composite material with a density of 99.7% and good interface bonding with a comparatively high bending strength of 766.65 MPa. This work provides a promising method to produce high volume fraction composites that can meet high strength requirements.     

Compact Quantum-Dot Microbeads with Sub-Nanometer Emission Linewidth

Fluorescent microbeads are widely used for applications in life sciences and medical diagnosis. The spectral contrast and sharpness of photoluminescence are critical in the utilities of microbeads for imaging and multiplexing. Here, microbeads capable of generating single-peak laser emission with a sub-nanometer linewidth are demonstrated. The microbeads are made of quantum dots that are tightly packed and crosslinked via ligand exchange for high optical gain and refractive index as well as material stability. Bright single-mode lasing with no photobleaching is achieved with particle diameters as small as 1.5 µm in the air. Sub-nm lasing emission is maintained even inside high-index surroundings, such as organic solvents and biological tissues. Feasibility of intracellular tagging and multi-color imaging in vivo is demonstrated.     

电动汽车用动力电池振动疲劳测试方法开发

动力电池是当前新能源汽车中的核心零件,其性能,安全,可靠与耐久性直接影响整个车辆安全耐久性能,而电池系统的抗振动冲击特性是产品开发设计过程中需要满足的重要指标.文中着重阐述动力电池振动疲劳的测试验证策略与具体实施指导,为电池系统研发和测试工作提供重要参考.     

Achieving High Electroluminescence Efficiency and High Color Rendering Index for All-Fluorescent White OLEDs Based on an Out-of-Phase Sensitizing System

Sensitizing conventional fluorescence (CF) dopants with thermally activated delayed fluorescence (TADF) materials has achieved considerable progress, by which the advantages of TADF materials and CF dopants can be fully harnessed. However, the usually used co-phase configuration of CF dopant-engaged sensitizing systems often encounters exciton loss due to Dexter energy transfer (DET). Herein, an effective out-of-phase configuration is proposed to sensitize CF dopants in the fabrication of white organic light-emitting diodes (WOLEDs). Based on a new efficient sky-blue TADF luminogen DCP-BP-DPAC which has an electroluminescence (EL) peak at 486 nm and an EL efficiency of 26.6%, a green TADF material BDMAC-XT, and a red CF dopant DBP sensitized by BDMAC-XT through an out-of-phase configuration without interlayer, efficient WOLEDs are successfully fabricated. By further adopting orange TBRB or 4CzTPNBu as intermediate sensitizers, more efficient energy transfer to DBP is achieved via Förster energy transfer. Through step-by-step energy transfer and elimination of excess DET process, high-performance all-fluorescent WOLEDs are achieved, providing excellent EL efficiencies over 23.0%, and highly stable white light with a high color rendering index of 87. The outstanding EL performance and high-quality emission color demonstrate the great potential of the proposed out-of-phase design for sensitizing systems of WOLEDs.     

水产品及其制品中大西洋鲑鱼实时荧光PCR检测方法建立

目的:三文鱼营养丰富,含有ω-3不饱和脂肪酸,深受大众喜爱,但存在产品标签标示错误、掺伪掺假、以次充好的现象。目前采用检测标准SN/T 3589.7—2013《出口食品中常见鱼类及其制品的鉴伪方法第七部》对鲑鱼成分检测,无法区分大西洋鲑鱼和其他种类的三文鱼。因此有必要建立一种用于区分上述几种三文鱼的快速检测方法。方法:研究建立了针对大西洋鲑鱼成分鉴定的实时荧光PCR法,并对该方法的特异性和检出限进行了验证。结果:该方法具有良好的特异性,检出限为1%(w/w)。结论:可应用于大西洋鲑鱼的日常检测,为监管部门提供技术支持。     

Influence of aluminum phosphate on the tribocorrosion performance of chemically bonded phosphate ceramic coatings

In this study, chemically bonded phosphate ceramic coatings (CBPCCs) with different contents of aluminum phosphate (AP) are prepared on stainless steel (AISI 304L). Differential scanning calorimetry, X-ray diffraction, contact angle test, and a tribocorrosion experiment are carried out to clarify the role of AP in the tribocorrosion performance of CBPCCs. The results show that, with the increase in the AP content, the enthalpy of curing increases because of the greater formation of the bonding phase AlPO₄. Both in static corrosion and in tribocorrosion, the corrosion current density of CBPCCs achieves the lowest value when the weight ratio of AP to polytetrafluoroethylene is about 0.78. Additionally, the influence mechanism of AP on tribocorrosion is clarified. AlPO₄ from the reaction between AP and Al₂O₃ has excellent mechanical properties and can enhance the wear resistance of CBPCCs by reducing the mechanical wear and the increased wear due to corrosion. The alumina particles wrapped by AlPO₄ can form a dense and smooth surface and change the direction of electrolyte propagation, which leads to the increase in the tribocorrosion resistance of CBPCCs.     

Electrowetting-Assisted Generation of Ultrastable High Charge Densities in Composite Silicon Oxide–Fluoropolymer Electret Samples for Electric Nanogenerators

Electric nanogenerators that directly convert the energy of moving drops into electrical signals require hydrophobic substrates with a high density of static electric charge that is stable in “harsh environments” created by continued exposure to potentially saline water. The recently proposed charge-trapping electric generators (CTEGs) that rely on stacked inorganic oxide–fluoropolymer (FP) composite electrets charged by homogeneous electrowetting-assisted charge injection (h-EWCI) seem to solve both problems, yet the reasons for this success have remained elusive. Here, systematic measurements at variable oxide and FP thickness, charging voltage, and charging time and thermal annealing up to 230 °C are reported, leading to a consistent model of the charging process. It is found to be controlled by an energy barrier at the water-FP interface, followed by trapping at the FP-oxide interface. Protection by the FP layer prevents charge densities up to −1.7 mC m⁻² from degrading and the dielectric strength of SiO₂ enables charge decay times up to 48 h at 230 °C, suggesting lifetimes against thermally activated discharging of thousands of years at room temperature. Combining high dielectric strength oxides and weaker FP top coatings with electrically controlled charging provides a new paradigm for developing ultrastable electrets for applications in energy harvesting and beyond.     

Sparse spectrum fitting algorithm using signal covariance matrix reconstruction and weighted sparse constraint

Multidimensional Systems and Signal Processing - Although sparse spectrum fitting algorithm has good multi-target resolution, the performance is decreased under the influence of strong...     

新能源电站EPC采购管理的优化研究

新能源发电项目具有工期紧、任务重、设备到货集中等特点,这些特点为EPC设备采购管理工作带来了很大的困难。本文通过对新能源发电项目中EPC采购管理的深入分析和优化研究,从传统EPC采购管理在新能源项目中面临的问题出发,提出了新能源发电项目中EPC采购管理的优化方案,旨在为相关专业人士提供参考,从而促进新能源发电项目的不断发展与优化。     

货车转向架服役期间车辆安全性演变规律研究

针对影响车辆运行性能的关键尺寸和参数,结合运用磨耗规律对转向架现场调研的结果,以C70型敞车为研究对象开展动力学仿真分析计算,确定转向架服役性能演变规律,以及转向架服役期间车辆安全性指标变化情况。结果表明:随着服役时间的增加,车辆在直线行驶时的各安全性指标均增大,但安全性指标值满足国内相关标准,当车辆参数达到检修限值时,车辆在高速行驶时会出现脱轨风险;而随着服役时间的增加,车辆的曲线通过性会出现一定程度的先转好再恶化的过程,这是由于车轮在磨耗后,等效锥度增大而导致,同时车辆在空车和重车工况下,安全性演变规律相似。